Modern Bathroom Ideas

Questions and Answers about Glass Sinks

2005-11-13T15:45:00.000-08:00

Question: Are glass sinks simple to install?

Answer: Anyone with some basic plumbing skills can install a glass sink, although it is always easier to hire a plumber.

Question: How do you keep the shine on the sinks?

Answer: Buff the sink with black or brown shoe polish to keep the beautiful shine of your sink. No harsh abrasives are to be used.

Question: What do I use to clean the sink?

Answer: Use a soft tablecloth with water and soap, glass cleaner, or any other non-abrasive cleaner to clean the sink without scratching the shiny surface of the glass. You may use vinegar to remove hard water spots on the sink.

Question: Can hot water cause the glass sink to break?

Answer: No. Our tempered glass sink will not crack or break under hot water under normal use.

Question: How durable is a glass sink?

Answer: Glass sinks are very durable if you treated it right. Normal everyday items such as brushes, combs, rings or small jewelry will not scratch or break the sink. The most common cause of breakage is improper installation.

Question: Should I place lights above it or below it to illuminate the sink?

Answer: That depends on which design you have. It is mostly depend on where you prefer to place it. You may move the light around to see how it looks then place it where you like it the best.

Question: Are your glass sinks approved by IAPMO/UPC code?

Yes. Our glass sinks are all approved by IAPMO and are compatible with U.S plumbing requirements.

Replace One Handle Faucet

2005-04-24T14:59:00.000-07:00

If the faucet on your modern bathroom sink is leaking or giving you problems, it needs to be repaired or replaced. If you are considering a new look for your bathroom, this is a perfect excuse for buying a new faucet. If you want to install yourself, it's not a problem.

Materials needed:

one-handled faucet with hardware
flexible water supplies lines
bucket
measuring tape
open-end wrenches
adjustable wrench
plumber's putty
safety glasses

Steps:

1. Turn off the water valves underneath the faucet.

2. Place an empty bucket underneath the sink to catch any remaining water beore you loosen the collar nuts on the P-trap. Remove the P-trap and set it aside.

3. Loosen the large nut holding the drain assemply in place.

4. Above the sink, unscrew the pop-up flange and remove it. If the flange is stuck, try inserting a screwdriver diagonally into the drain for extra leverage. This will free up the drain under the sink and you can remove it.

5. Loosen the fittings on the hot and cold water supply lines and romove them. Wear safety glasses while working under the sink so debris won't settle into your eyes. If you considering to upgrade to flexible supply lines, measure the distance from the supply valves to the faucet so you will know what size to buy.

6. Loosen and remove the faucet mounting nuts, which secure the faucet to the sink or countertop. Carefully pull the faucet out and set it aside.

7. Clean and dry the areas where the old faucet and drain were.

8. Measure the distance between the centers of the two outermost mounting holes. This will determine what size faucet you need to buy. You could also take the old faucet to the store with you for reference.

9. Assemble your faucet according to the manufacturer's specs. Attach any hardware that needs to be in place prior to installation.

10. Attach your new supply lines before you attached the faucet to the sink. This way, it won't have to squeeze a wrench into the small space between the sink and the water later. Be sure to hold the assembly steady with a wrench while you hand-tighten the supply lines in place. Don't overtighten the connections or you will bend and ruin the pipes on the faucet.

11. Drop the new faucet into place, allowing the supply lines to fall through the appropriate holes in the sink.

12. Secure the faucet mounting nuts to the underside of the countertop.

13. Attach the new supply lines to the appropriate water pipe walve stops and tighten these fittings.

14. Assemble your pop-up drain according to the manufacturer's instructions.

15. Drop the pop-up rod down through the hole provided for it in the new faucet. Attached the flat portion of the rod from the underneath the sink.

16. Add a roll of plumber's putty to the new drain flange. Lift the tailpiece of the drain up through the drain hole in your sink and secure the flange to the tailpiece.

17. Tighten the brass nut that holds the assembly securely under the sink.

18. Hook the trip lever through the pop-up bar. Secure the other end of the lever to the pop-up drain.

19. Drop the stopper into the sink drain hole. Push the trip lever farther into the drainpipe to hook the lever through the stopper. Move the pop-up rod up and down to make sure the two are connected.

20. Replace the P-trap and tighten the collar nuts. Turn on the water and check for leaks.

If the faucet is leaking, call the plumber.

Good Luck

2005-02-04T23:22:00.000-08:00

Modern Glass Sinks

If you're looking for a modern bathroom glass sink :: glass sinks sinks, go for glass. Tempered glass sinks are more popular than ever. Glass sinks are very strong and durable. We're seeing glass being used with everything from ceramic tile to limestone and marble. Tempered glass sinks are 3 times cheaper and stronger than stone sinks.

Glass Sinks comes with different shapes, colors, textures, and styles. Overcounter, freestanding, undermounted, and so on.

Glass sinks are easier to clean and maintenance. Just spray a little bit of windex or use mild soap to clean. Great ideas for modern bathroom sinks.